Robin Door Designs

Flexibility is the main strength of CNC routed products and using the strength of the best Japanese CNC router machine, we are able to offer endless variety of designs. We can also custom make accordingly to your liking or individual taste.

Below are some of the designs which we are offering. If you have designs of your own, let us know and we can work out the cost and the quantity requirement for order.

Robin Door Specification

Material

Board	High quality routed rubber wood MDF
Primer	Moisture resistant water-borne primer

  Standard Dimension

Thickness	35 (1-3/8") mm or upon request
Width	18", 24", 28" 30", 32", 33 6/9" and 36" or upon request
Height	80", 83" and 96" upon request

  Dimension Tolerance

Thickness	0.5mm
Width	1.5mm
Height	-/-1.5mm
Component	1.0mm
Squareness	1.0mm per meter
Dimensional warp	<5.0mm

 Physical Properties

Density	740kg/m3 (20kg/m3)
Screw holding	>=1300N
Thickness swelling	<5.0%
Linear expansion	<0.10%

  Surface Quality

No. of coat	A minimum of 2 primer coats
Scope	Evenly primed on all faces, edges and routed surfaces
Quality	No raised grain or rough texture on any routed surface or edge

  Installation

Application	Interior
Screw type	Cutback head and wide thread spacing 1-1/4"
Hinge	Up to 84" high doors require a minimum of 3 hinges. Above 84" high doors require a minimum of 4 hinges
Installation	Installed in predrilled holes; for 1-1/4", use a 7/64" drill to a depth of 1-5/6"

Introduction | Production | Application | Specification
Downstream | Direct Printed MDF | Robin MDF Door | Inquiry

Main